Tadiran Telecom FlexSet 280, Руководство пользователя

Страница: 69 / 132

Coral Terminal Equipment
5-7
Flex
Set AP
A-F
, AP
DL
-F
S In
stall
ati
on
5
Program API Device Connection
The PC that will be used as the Application Programming Interface (API) device must
be equipped with an RS-232 asynchronous serial data interface that can be configured
for a data rate of 4800, 9600 or 19,200 bps, eight data bits, one stop bit and no parity
bit. The API device
mus t use the ASCII character set. The earth-ground connection to
the API device should be the same earth-ground connection supplied to the Coral
system whenever possible.
RS-232E Programming Port
The serial interface of the FlexSet APA port via the provided RS-232 cable
(CN# 7244-6914055) conforms to the EIA RS-232E specification, and is wired as a Data
Communications Equipment (DCE) device, using a D-type (female) connector. The
interface allows connection of a common, asynchronous CTI products such as the
CCM, CAP, FlexCT PathFinder, etc.
Figure 5-7
shows use of the pin number and function assignments on the FlexSet APA
cable.
Figure 5-7 Coral
FlexSet APA RS-232E
Proprietary Cable
Connections
The APA RS-232 default setup is:
„
Baud rate 9600 bps
„
8 bits
„
No parity
„
1 stop bit
To change this default, see
APA Setup, on page
5-10
.
4 Data Communication Connections
9
6
8
7
6
5
4
3
2
1
9
8
7
6
5
4
3
2
1
Data Terminal Ready (DTR)
Transmit Data (TR)
Receive Data (RD)
Data Carrier Detector (DCD)
NC
Clear To Send (CTS)
Request To Send (RTS)
Data Set Ready (DSR)
Signal Ground (GND)
To Server/PC Serial Port COM ½
(9 pin female connector)
RS-232 cable CN#7244-6914055
1
APA
RS-232
8
8
1
RJ-45 socket (female)
external view
RJ-45 plug (male)
clip at rear
orange
brown
green
gray
yellow
black
blue
red
To FlexSet
APA RS-232