Tadiran Telecom Coral Sentinel Pro, Инструкция по установке и справочное руководство, Страница: 42 / 72

32 Coral Sentinel Pro Web Portal Sentinel Pro Installation Procedure and Reference Manual - for Coral IPx / FlexiCom
Displayin
g the Sentinel
Pro S
ta
tus
5
................................................................................................................

Displaying the Sentinel Pro Status
The Sentinel Pro Status page ( Figure 18 ) includes information related to the
operational status of the Sentinel Pro unit, as well as basic identification parameters.
To open the page, click Status on the left pane.
Figure 18 Sentinel Pro
Status Page
Table 7 describes the Sentinel Pro status and identity parameters. All fields are
read-only.
Table 7 Sentinel Pro
Status Information
Parameter Description
Status The operational status of the Sentinel Pro. This field is set to
Active if the unit is operating and to Inactive if it is not.
IP address The public IP address of the Sentinel Pro unit.
MAC
address The unique MAC identification number of the Sentinel Pro unit.
This MAC address is the first of the three MAC addresses on the
Sentinel Pro packing box and on the bottom of the unit. (The
second and third MAC addresses are not used.)
NOTE: In Coral FlexiCom and Coral IPx systems, this MAC address
must be entered in the PI (see
Defining Sentinel Pro Parameters
(Route: IP, 8) , page 45
).
Identity The name and dial number of the Sentinel Pro unit. If no dial
number is defined, this field is empty.
Local Time The local time as defined on the Coral.