Tadiran Telecom Coral Sentinel Pro, Инструкция по установке и справочное руководство, Страница: 24 / 72

14 About the Coral Sentinel Pro Sentinel Pro Installation Procedure and Reference Manual - for Coral IPx / FlexiCom
Se
nt
inel
Pro Exterior Description
2
Front Panel
Table 3 describes the components of the Sentinel Pro front panel.
Figure 6 Sentinel Pro
Front Panel
Table 3 Sentinel Pro
Front Panel Features
Ready Control Data Power Maint. Eth
Link/Act
Sentinel Pro
Restore to
default factory
settings
Ready Control Data Power Maint. Eth.
Link/Act
Component Description
Ready LED Lights when the Sentinel Pro is ready for operation.
Control LED Lights when at least one endpoint is registered in the
Sentinel Pro.
Data LED Flashes when RTP data is transmitted through the Sentinel Pro.
Power LED Lights when the Sentinel Pro is powered and its power switch is
turned ON.
Maint. LED Lights during Sentinel Pro upgrade.
Eth. Link/Act
LED

Lights when the Sentinel Pro is connected to the LAN.

Flashes when data is transferred.
Restore to
default factory
settings Button that resets the Sentinel Pro IP address and net mask
parameters to the original factory settings (see
Restoring the
Sentinel Pro Configuration to its Factory Settings , page 56
).
CAUTION: This procedure resets the Sentinel Pro and all its
endpoints and may cause interruption of calls and services in
the system.