manualshive.com logo in svg

Tadiran Telecom Coral IPx Office, Руководство по установке и аппаратным средствам, Страница: 60 / 510

Поделиться
Скачать
Tadiran Telecom Coral IPx Office Скачать руководство пользователя страница 60

2-16

 

Hardware Installation Procedure

Coral IPx Office Installation Manual

Eq

uipment Insta

llation 

2

0

0000

The IPx Office is supplied to the field with the front rack-mounting brackets attached 
to the unit. These brackets are designed to fit the unit onto a 19” rack. If the unit is to 
be mounted onto a 23” rack, perform the following procedure. Otherwise, skip to 

Preparing the Rack for Unit Mounting, page 2-16

.

Preparing the Unit for Mounting onto a 23” Rack

1.

Remove the existing 19” front rack-mounting brackets from the unit.

2.

Align a 23” front rack-mounting bracket such that the three holes are adjacent 
with the holes on the unit.

3.

Insert three of the M4X8 screws provided into the three holes and fasten the 
right bracket to the unit.

4.

Repeat 

Step 1

 through 

Step 3

 for the other front rack-mounting bracket.

Figure 2-7    23” Bracket 
Installation

Preparing the Rack for Unit Mounting

The IPx Office unit is supported from the rear by two brackets that are attached to the 
rack. To install the support brackets (see 

Figure 2-8

):

1.

Fasten the left rear rack-mounting bracket to the rack.

2.

Fasten the right rear rack-mounting bracket to the rack.

The fasteners that are secured to the rack are not included.

...................................................................................................

7

Mounting the Office onto a Rack

Содержание Coral IPx Office































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов