Tadiran Telecom Coral IPx 500X, Инструкция по установке и справочник по аппаратной части

Страница: 169 / 400

External Connections
5-43
I/
O RJ-
4
5 Co
n
n
ect
io
ns V
ia Re
ar P
a
n
el
Fo
r Cor
a
l In
te
rf
ace
Ca
rd
s
5
5.7
I/O RJ-45 Connections Via Rear Panel
For Coral Interface Cards
0
In the Coral IPx 800 the I/O connections of the following interface cards are performed
via cables connected to their rear panel:
PUGW, UGW-E and UGW cards include front panel and rear panel I/O
options. However, there are various factors involved. Therefore, their
description is not included in this section. For details, see the Coral VoIP
Installation Procedure and Hardware Reference Manual.
There are two types of Coral IPx 800 systems backplane:
„
With two RJ-45 connectors per card slot (discontinued)
„
With one connector per card slot, as shown in
Figure 5-29
1 Cards with Rear Panel I/O Connections
„ 2DT Card (PRI-23, PRI-30, T1, 30T, or 30TM Configuration)
on page 5-45
„ PRI-23, PRI-30 Card (Layout UDT “C” and later)
on page 5-48
„ T1, 30T/x, 30T/E Card (Layout UDT “C” and later) on page 5-49
„ UGW Card (layout B1) and UGW-E on page 5-50
„ PUGW Card on page 5-54