Tadiran Telecom ASTW-(H)18QA2/xR1-SA Series, Руководство пользователя

Страница: 17 / 23

Install indoor uni
Dimension drawing of indoor unit installation
8 " above
Space to the ceiling
6 " above
7 ft above
Space to the floor
Mounting plate
Wall-through Hole
1. Make a hole with an electric hammer or a
water drill at the predetermined position on
the wall for piping, which shall slant outwardly
by 5
°
-10
°
.
2. To protect the piping and the cables from
being damaged running through the wall,
and from the rodents that may inhabit in
the hollow wall, a pipe protecting ring shall
be installed and sealed with putty.
Note: Usually, the wall hole is <1>2. 4" ~<l> 3. 2 " .
Avoid pre-buried power wire and hard wall
when making the hole.
8 "