– 2 –
– 3 –
Safety
Table of Contents
Safety
.......................................................................
3
Meet TADIRAN AIROW 3
™
................................
4
Device Specifications
.........................................
5
Included Parts
.......................................................
6
Installation
.............................................................
7
Verification
...........................................................
11
Warranty
...............................................................
13
Patent Information
............................................
14
• This Class III appliance must only be powered with short-
circuit proof, safety extra low voltage (SELV) corresponding
to the marking on the device.
• This Class III device must only be supplied at SELV.
• This Class III device is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge unless
they have been given supervision or instruction concerning
the use of the device by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the device.
• This Class III device is not intended to be installed as a stand-
alone device. It is always installed in the indoor part of an air
conditioner (the receiving equipment).
• This Class III installation manual is intended to provide all
required instructions on how to install the purifier into the
indoor part of an air conditioner.
• Verify that the installation is performed in accordance with
the installation diagrams.
• Means for disconnection of the supply mains must be incor-
porated in the fixed wiring following the wiring rules.
• Note that the device contains metal parts that carry high
voltage.
Never insert a finger or any other unprotected
body part into the device! Use only isolated tools when
servicing or testing the device!
• The mains to the DC power supply has a contact separation
in all poles that provide full disconnection under overvoltage
category III conditions, the means for disconnection is a quick
disconnect mains plug.
Please follow the installation procedure stated below.
This Device is a Class III Equipment
