Tadiran Telecom aeonix TGW4, Руководство пользователя

Страница: 59 / 141

T G W S IP -F X S /F S O G a te w a y S e rie s
User Manual
Tadiran Telecom
43
Subscriber Line Configuration Interface
Figure 2-16
Table 2-14 Subscriber Line Configuration Parameters
Name Description
Phone line Fill in the port number associated with this port. “FXS-n” corresponds to the Line > Batch
configuration > ID n .
SIP account
name Fill in the number associated with this port.
Caller ID text Fill in the display name which will be contained in the From field of SIP message. e.g. From: "Bob
" <sip:8000@127.0.0.1>;tag=14340047091433920745-1, Bob is the display name.
Local SIP port This parameter is displayed only when Multi port is selected in page Advanced > SIP . Set the port
used for receiving and sending SIP messages associated with the line.
If this parameter is not specified, the local port configured in
Basic > SIP is used.
Note: This parameter is displayed only when Multi port is checked on Advanced > SIP page.
Registration Select if this line is required to register to a soft switch. This is selected by default.
Auth user name If Registration is selected, you should enter the user name for registering the line here.
This is not mandatory. If this parameter remains blank, the phone number of the extension set is
used.
Registrar
password If Registration is selected, users must enter the authentication password for registering of this line
here.