Tadano GR-1000XLL-4, Руководство пользователя

Страница: 3 / 24

Tadano electronic LOAD MOMENT INDICATOR system
(AML-E2) including:
• Control lever lockout function with audible and visual
pre-warning
• Number of parts of line
• Boom position indicator
• Outrigger state indicator
• Slewing angle
• Boom angle / boom length / jib offset angle / jib length /
load radius / rated lifting capacities / actual loads read out
• Potential lifting height
• Ratio of actual load moment to rated load moment
indication
• Automatic Speed reduction and slow stop function on
boom elevation and slewing
• Working condition register switch
• Load radius / boom angle / tip height / slewing range preset
function
• External warning lamp
• Tare function
• Main Hydraulic oil pressure
• Fuel consumption monitor
• Main winch / auxiliary winch select
• Drum rotation indicator (audible and visible type) main and
auxiliary winch
• On rubber indicator
TADANO AML-E2 monitors outrigger extended length and
automatically programs the corresponding "RATED LIFTING
CAPACITIES" table.
Operator's right hand console includes transmission gear
selector, slewing lock lever and sight level bubble.
Upper console includes,
roof washer and wiper switch,
emergency outrigger set up key switch,
jib equipped / removed select switch,
high speed winch (main / aux) switch, Cab tilt switch,
Pump disconnect enable switch and boom emergency
telescoping switch (2nd and 3rd-top).
NOTE: Each crane motion speed is based on unladen conditions.
CARRIER SPECIFICATIONS
TYPE
- Rear engine, left hand steering, driving axle 2-way
selected type by manual switch, 4 x 2 front drive, 4 x 4 front and
rear drive.
FRAME - High tensile steel, all welded mono-box construction.
TRANSMISSION - Electronically controlled full automatic
transmission. Torque converter driving full powershift with
driving axle selector. 6 forward and 2 reverse speeds, constant
mesh.
3 speeds - high range - 2 wheel drive; 4 wheel drive
3 speeds - low range - 4 wheel drive
TRAVEL SPEED - 22 mph (36 km/h)
GRADEABILITY (tan θ ) - 84% (at stall), 57%*
* Machine should be operated within the limit of engine
crankcase design (30°: Cummins B6.7)
AXLE
- Front: Full floating type, steering and driving axle with
planetary reduction. Rear: Full floating type, steering and driving
axle with planetary reduction and non-spin rear differential.
STEERING - Hydraulic power steering controlled by steering
wheel. Four steering modes available: 2 wheel front, 2 wheel
rear, 4 wheel coordinated and 4 wheel crab.
SUSPENSION - Front: Rigid mounted to frame. Rear: Pivot
mounted with hydraulic lockout device.
BRAKE SYSTEMS
- Service: Air over hydraulic disc brakes on
all 4 wheels. Parking / Emergency: Spring applied-air released
brake acting on input shaft of front axle. Auxiliary: Electro-
pneumatic operated exhaust brake.
TIRES - 29.5-25 36PR (OR) Air pressure: 68 psi (470 kPa)
29.5-25 40PR (OR) Air pressure: 67 psi (465 kPa)
OUTRIGGERS - Four hydraulic, beam and jack outriggers.
Vertical jack cylinders equipped with integral holding valve. Each
outrigger beam and jack is controlled independently from cab.
Beams extend to 23' 11-3/8" (7.3 m) center-line and retract to
within 10' 10-1/2" (3.315 m) overall width with floats. Outrigger
jack floats are attached thus eliminating the need of manually
attaching and detaching them. Controls and sight bubble located
in superstructure cab. Four outrigger extension lengths are
provided with corresponding "RATED LIFTING CAPACITIES" for
crane duty in confined areas.
Min. Extension 8' 10-1/4" (2.7 m) center to center
Mid. Extension 18' 1/2" (5.5 m) center to center
Mid. Extension 21' 11-3/4" (6.7 m) center to center
Max. Extension 23' 11-3/8" (7.3 m) center to center
Float size (Diameter) 1' 11- 5/8" (0.6 m)
ENGINE
Model Cummins B6.7
Type Direct injection diesel
No. of cylinders 6
Combustion 4 cycle, turbo charged and after cooled
BoreXStroke, in. (mm) 4.212 X 4.882 (107 X 124)
Displacement, cu. in (liters) 409 (6.7)
Air inlet heater
24 volt preheat
Air cleaner Dry type, replaceable element
Oil filter Full flow with replaceable element
Fuel filter Full flow with replaceable element
Fuel tank, gal. (liters) 79.2 (300), right side of carrier
Cooling Liquid pressurized, recirculating by-pass
Radiator
Fin and tube core, thermostat controlled
Fan, in. (mm) Suction type, 9-blade, 28 (711) dia.
Starting 24 volt
Charging 24 volt system, negative ground
Battery 2-120 amp. Hour
Compressor, air, CFM (l /min) 17.0 CFM (481) at 2,400 rpm
Output, Max. HP (kW) Gross 280 (209) at 2,200 rpm
Torque, Max. ft-lb (Nm) 850 (1,152) at 1,500 rpm
Capacity, gal. (liters)
Cooling water 2.7 (10)
Lubrication 4.0 (15)
Fuel 79.2 (300)
DEF/AdBlue 15.0 (57)
- 3 -
Form No. GR-1000-4-00102/US-03