background image

5

TAD-CR1TX

English

CST

The heart of the system is the Coherent Source Transducer
(CST), shown in Figure 2. The tweeter diaphragm is mounted
concentrically within the apex of the midrange cone and provides
a point source of sound from 250 Hz to 100 kHz. It is time
coherent, due to the shallow midrange-cone profile made possible
by the superior strength of beryllium, and produces a 
superblycontrolled radiation pattern.
CST ensures a perfect spectral balance between the direct and
reflected sounds that arrive at the listener’s ears, providing
a more consistent sound throughout the listening room and
improved imaging capability.

 

Figure 2. The TAD Compact Reference’s Coherent Source 

Transduce

TECHNOLOGY

Beryllium Diaphragms

Each TAD Compact Reference speaker system features
proprietary beryllium-manufacturing technology for the midrange
and tweeter diaphragms. The lightest and most rigid metal
available for diaphragms, beryllium performs with strength and
damping characteristics unmatched by any of the materials
currently used in high-end audio loudspeaker manufacturing, as
shown in Figure 1.
Beryllium’s combination of light weight and exceptional strength
enables diaphragm resonance to be pushed far beyond the
operating band of its drive units. This produces near-perfect
piston behavior in the speakers, resulting in cleaner sound and
greater accuracy of reproduction.

18 000

Velocity (m/s)

Inner Loss

(tan δ)

16 000

14 000

12 000

10 000

8 000

6 000

4 000

2 000

0.005

0.015

0.025

0

Aluminum

Beryllium

Boron Alloy

Ceramic Carbon

Ceramic Graphite

Paper

Titanium

 

Figure 1. Velocity properties of  
beryllium and other materials.

Содержание Compact Reference One



















Отзывы: