Tactic FPV-RM1, Инструкция по эксплуатации

Страница: 2 / 12

2
(1) FPV-RM1 monitor
(1) 7.4 volt 1800mAh lithium-polymer battery
(1) Sun shield
(2) RP-SMA mast antennas
(2) A/V cables
(1) External battery cable with adapter
(1) Micro-fi ber cloth
Carefully thread the included antennas onto the RP-SMA receptacles on the monitor. Do not cross-thread
or overtighten! Mount the antennas before applying power to the monitor.
Power can be supplied by the included 7.4V 1800mAh (milli-amp hour) lithium-polymer (LiPo) battery
module which is located in the rear of the monitor, or from an external 12V DC power source.
CHARGING THE BATTERY:
This monitor includes a built-in circuit to recharge the included battery. It’s
not necessary to remove the battery from the monitor for the purpose of recharging. Connecting an external
DC power source to the monitor’s DC IN jack will automatically start the charge process, as indicated by
the glowing red LED which will turn off when charge is complete. Acceptable power sources include an
AC/DC wall adapter, tabletop DC power supply, external battery, etc., rated to deliver 7.0 – 22.2V DC and
600-750mA (0.6-0.75A) of current. Tactic items TACZ5553 (110VAC / 12VDC Power Adapter) for N. America,
and TACZ5554 (220V AC/12V DC Power Adapter) for the EU are available separately through local hobby
retailers.
CONTENTS
ANTENNA INSTALLATION
INPUT POWER OPTIONS