Tactacam Reveal XB SK, Инструкция по эксплуатации

Страница: 10 / 20

10
1. While your camera is connected to your phone with WiFi, you will be
able to access a live preview to help with camera setup and proper
placement.
2. Ensure that the antenna is securely tightened.
3. Wipe down the seal, removing any dirt or debris.
4. Turn the camera to the ON position.
5. Format your SD card in the App.
6. As long as your phone picks up a signal, be sure a motion detected
picture is sent to your phone via the App.
LEAVING YOUR CAMERA IN THE FIELD
START USING THE REVEAL X
SENDING A TEST PICTURE
(CONTINUED)
• When the test picture sends successfully, the status light will
turn green.
• If the status light turns red there may have been an issue
trying to send the test photo. This is usually caused by signal
strength.
2. Refer to the app to be sure the picture is successfully sent.
3. While your camera is connected to your phone with WiFi, you will be
able to access a live preview to help with camera setup and proper
placement.
4. Allow the camera to connect to 4G signal. The LED signal indicator
light will be constant green.