8
Fig 8
• Turn on the faucet and fill the tank.
• Pour the liquid detergent into the tank.
IMPORTANT
- Only chemicals recommended
by the appliance manufacturer should be
used, i.e. non foaming. Follow the chemical
manufacturer’s directions regarding use,
handling and health and safety warnings.
WARNING
If the chemical comes in
contact with the eyes and/or skin or is
swallowed, refer to the SDS information
provided by the manufacturer of the
chemical.
After the tank is filled, remove the filling hose
and reinsert the filter into the tank opening.
• The tank capacity is 4.5 gal. Do not overfill
the tank as spills may occur when in use.
•
IMPORTANT
- When the solution tank has
emptied, switch off the machine and empty the
recovery tank before refilling the solution tank.
3. Controls
The operating controls are located on the
handle. (Fig 9). The icons adjacent to each
switch identify the functions.
4
1
2
3
Fig 9
1 - LEDs Battery charge indicator
The LED lights will indicate the charging status.
Green LED (1c) maximum.
Yellow LED (1b) half
Red LED (1c) minimum
When the battery is completely discharged,
(Red LED (1a) of the battery charge indicator
flashes for a few seconds. At this point the
battery requires recharging.
2 – Vacuum motor switch
Used to switch the vacuum motor ON and OFF.
Provides suction at the squeegee. Button is
illuminated when in the ON position.
3 – Brush motor switch
Used to switch brush motor ON and OFF. To
start the brush rotating, pull the lever on the
right or left hand side of the handle 5 (Fig 10).
Button is illuminated when in the ON position.
1c
1a
1b