5
Fig 3
Fig 2
Fig 5
HOW TO OPERATE THE MACHINE
Plug the machine in as directed and lower the
handle to the desired operating height. Push
the safety switch forward (see figure 4) and
squeeze the switch triggers beneath the handle
grips. This activates the motor and stars the
pad in operation. Each time your release the
triggers the safety switch will reset. You will
need to follow the direction above to restart the
machine.
CAUTION:
When leaving the machine
unattended, disconnect the wall plug and return
the handle to the “locked” upright position to
prevent accidental starting.
Push the machine forward in a straight line, at
a slow walking speed. Overlap each pass by
about 1 inch (25mm).
Fig 4
Safety
Switch
Switch
Trigger
AFTER USING THE MACHINE
Upon completion, dust mop with treated mop to
pick up all burnishing residue.
The condition of the floor pad has a direct effect
on the performance of your burnisher. When
the pad becomes dirty, turn it over and use
the other side. When finished, wash the pad
out and allow it to dry completely before using
again.
TRANSPORTING THE MACHINE
Use the rear wheels for transporting the
NM1600 Ultra High Speed Burnisher. This will
insure that the operating wheels remain clean
and smooth for use on clean floor surfaces (see
figure 5).
