Your new High Speed Burnisher will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior
to packaging, your High Speed Burnisher was inspected by a Quality Control Technician.
SAFETY INSTRUCTIONS
This Floor Machine should be grounded while in use to protect the operator
from electric shock. This machine is equipped with a 3-conductor cord and a 3-
prong grounded type attachment cap plug to fit the proper grounding type recep-
tacle. The green (or green and yellow) conductor in the cord is the grounding
wire. Never connect this wire to anything other than the grounding blade.
The Floor machine is provided with an attachment cap plug, as shown in
Sketch A, and is intended for use on a nominal 120 volt circuit. If a properly
grounded receptacle, as shown in Sketch A, is unavailable, an adaptor, as shown
in Sketch C, is available and should be installed, as shown in Sketch B, if the out-
let box that houses the receptacle is grounded. Be sure to fasten the grounding tap
to the faceplate screw.
These guidelines are presented for your protection and convenience. Please
read them carefully, since a failure to heed these precautions could result in dis-
comfort or injury. When using an electrical appliance, basic safety precautions
should always be followed.
ONE LAST REMINDER!
Read All Instructions, Warnings and Cautions Before Using!
WARNING
TO AVOID FIRE, DO NOT USE WITH A FLAMMABLE OR
COMBUSTIBLE LIQUID TO CLEAN FLOOR.
WARNINGS
READ THIS OPERATOR’S MANUAL!
WARNING:
You must have training in the operation of this machine before using.
WARNING
: Machines can burn flammable materials and vapors. Do not use this machine with or near fuels, grain dust, solvents, thinners or other
flammable materials.
WARNING:
Do not operate this machine unless it is completely assembled.
WARNING:
Do not use this machine as a step or to move furniture.
WARNING:
When disconnecting power cord from electrical outlet, grasp the plug. Pulling it out by the cord itself can damage cord insulation and internal
connection to plug. To prevent electric shock, always remove the electrical plug from the electrical outlet before doing any repairs or maintenance to
this machine.
WARNING:
To prevent injury, always remove the electrical plug from the electrical outlet before changing the polishing pad and before leaving the machine.
WARNING:
To prevent injury, keep hands, feet and loose clothing away from the rotating pad.
WARNING:
Maintenance and repairs must be done by authorized personnel only.
WARNING:
Keep all fasteners tight. Keep adjustments according to specifications.
WARNING:
Keep the electrical parts of the machine dry. For storage, keep the machine in a building.
WARNING:
Always use a three-wire electrical system connected to the electrical ground. For maximum protection against electric shock, use a circuit that is protected
by a ground fault circuit interrupter. Consult with your electrical contractor.
WARNING:
To prevent damage to the power cord, do not let the pad, pad driver or wheels touch the power cord when the machine is running. Always lift the power
cord over the machine.
WARNING:
Make sure all labels, decals, warning, cautions and instructions are fastened to the machine.
