2.4.1
Electric current
DANGER!
Danger to life due to electric power!
There is an immediate risk of fatal electric shock if
live components are touched. Damage to the insula-
tion of the individual components can be fatal.
– Have all work on the electrical equipment per-
formed by skilled electricians.
– In the event of damage to the insulation, cut off
the power supply immediately and initiate
repairs.
– Before working on live components of electrical
systems and equipment, de-energise these
components and secure them in this state for
the duration of the work. Adhere to the following
safety rules in this regard:
– Disconnect.
– Secure against restart.
– Verify that components have been de-ener-
gised.
– Ground and short-circuit.
– Cover or shield any adjacent live compo-
nents.
– Never bypass or disable any fuses. Comply with
the correct amperage specification when
replacing fuses.
– Keep moisture away from all live components.
This may lead to short circuits.
2.4.2
Mechanical dangers
CAUTION!
Danger of injury posed by sharp edges and pointed
corners!
Sharp edges and pointed corners may cause skin
grazes and cuts.
– Proceed with caution when working in the
vicinity of sharp edges and pointed corners.
– If in doubt, wear safety gloves.
Electric power
Sharp edges and pointed corners
TACOTHERM FRESH PETA 2 / PETA 2 X
Safety
V02.2020 11/2020
Item no. 215747
EA no. 1329
Operating instructions
14
