TACOFLOW3 MAX / MAX PRO
4
Instructions for installation and use
MKTG-TRA-MAN-E9150400-10/2019-ENG
2
RELEVANT INFORMATION
2.1
IDENTIFICATION OF THE MANUAL
This document is called
Instruction Manual
(hereinafter “manual”).
The manual is identified by the following data shown on the cover and at the foot of the page:
• “EN” language code
• “Translation of the original instructions” wording
• ISO 7000 symbol of the instruction manual (on the cover)
•
Identification code
• Issue
• Revision
2.2
INFORMATION ABOUT THE MANUAL
ATTENTION
THIS MANUAL MUST ALWAYS BE AVAILABLE TO THE AUTHORISED OPERATORS AND BE STORED NEAR THE WELL-KEPT AND
PRESERVED CIRCULATOR.
THIS MANUAL MUST BE DELIVERED WITH THE CIRCULATOR IF IT IS SOLD TO ANOTHER USER.
IT IS ADVISABLE TO TAKE NOTE OF THE IDENTIFICATION DATA OF THE DOCUMENT: CODE, ISSUE AND REVISION
TO REQUEST A COPY OF THE MANUAL FROM THE MANUFACTURER IN THE CASE OF LOSS OR DETERIORATION.
THIS MANUAL REFLECTS THE STATE OF THE ART OF THE CIRCULATOR AT THE TIME OF MARKETING AND CANNOT BE
CONSIDERED INADEQUATE SIMPLY BECAUSE IT CAN BE SUBSEQUENTLY UPDATED.
ATTENTION
BEFORE USING THE CIRCULATOR, IT IS MANDATORY TO READ AND BE CERTAIN YOU HAVE UNDERSTOOD ALL THE PARTS OF
THIS MANUAL.
THIS MANUAL IS AN INTEGRAL PART OF THE CIRCULATOR: KEEP FOR FUTURE CONSULTATION.
FAILURE TO COMPLY WITH THE INSTRUCTIONS AND WARNINGS DESCRIBED IN THIS MANUAL WILL VOID THE WARRANTY.
THE MANUFACTURER CANNOT BE HELD LIABLE FOR DAMAGE TO PERSONS, ANIMALS OR PROPERTY CAUSED BY FAILURE
TO COMPLY WITH THE INSTRUCTIONS AND WARNINGS DESCRIBED IN THIS MANUAL AND BY THE CIRCULATOR BEING USED
INCORRECTLY.
2.3
RECIPIENTS OF THE MANUAL
This manual is intended exclusively for the operators who are authorised to use and service the circulator based on the
specific technical and professional skills required for the type of intervention.
