Taco X Pump Block Скачать руководство пользователя страница 1

1 of 16

SUPERSEDES: July 1, 2010

EFFECTIVE: October 1, 2010

WARNING SYMBOL: THIS SYMBOL INDICATES THE PRESENCE OF HAZARDS WHICH
CAN CAUSE SEVERE PERSONAL INJURY, SUBSTANTIAL PROPERTY DAMAGE OR
EVEN DEATH IF IGNORED.

The Taco X – Pump Block (XPB) represents a breakthrough in the design, control and installation of heating systems.  The patent
pending design combines a variable speed mixing control (VSMC), heat source circulator, system circulator, and heat exchanger into a
single unit. This combination delivers complete isolation between the heat creation source side of the system (boiler, water heater, etc.)
and the heat delivery side of the system (radiant tubing, glycol based snowmelt, baseboard, etc.). Extremely versatile, the
X – Pump Block can be set up to operate in outdoor reset, setpoint or delta T limiting mode.

Instruction Sheet

X – Pump Block (XPB)

102-202

General

Table of Contents

TYPICAL PIPING ------------------------------------------------ 2
GETTING READY ----------------------------------------------- 3
APPLICATION ---------------------------------------------------- 3
DESIGN PROCEDURE ----------------------------------------- 3
INSTALLATION OF X – PUMP BLOCK ------------------- 4
OUTDOOR RESET MODE ------------------------------------ 5
OUTDOOR RESET SETTINGS ------------------------------ 5
SETPOINT AND DELTA T MODE --------------------------- 6
SETPOINT AND DELTA T SETTINGS --------------------- 7

HEAT SOURCE OPERATION MODE ---------------------- 7
SET UP OF VARIABLE SPEED MIXING CONTROL -- 8
DISPLAY OPERATION ---------------------------------------- 11
TROUBLE SHOOTING ---------------------------------------- 13
ERROR MESSAGES ------------------------------------------ 14
REPLACING CARTRIDGE ASSEMBLY ------------------ 14
TECHNICAL DATA --------------------------------------------- 15
CLEANING ------------------------------------------------------- 16
LIMITED WARRANTY STATEMENT ---------------------- 16

Plant ID#: 001-3883

MIX

SUP

DEM

VIEW

F

%

1

ITEM

MENU

X - PUMP

 BLOCK

PATENT

 PENDING

XPB-1

TM

UL

R

C

US

X – PUMP BLOCK (XPB)

VARIABLE SPEED MIXING CONTROL (VSMC)

A Taco resource – saving product

Содержание X Pump Block

















Отзывы: