Taco iWorx SMZ1, Инструкция по применению

Страница: 4 / 28

iWorx® SMZ1
4 505-048-2, Effective: March 10, 2015
© 2015 Taco Electronic Solutions, Inc.
Taco Electronic Solutions, Inc. will not be responsible for any product or part not installed or operated in conformity with
the Document and instructions or which has been subject to accident, disaster, neglect, misuse, misapplication, inade-
quate operating environment, repair, attempted repair, modification or alteration, or other abuse. For further informa-
tion, please refer to the last page of this Document for the company’s Limited Warranty Statement, which is also issued
with the product or available at www.taco-hvac.com.
APPLICABLE DOCUMENTATION
INSTALLATION GUIDE
General
CAUTION: This symbol is intended to alert the user to the presence of important installation and mainte-
nance (servicing) instructions in the literature accompanying the equipment.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Contains lithium type battery; dis-
pose of properly.
WARNING: Electrical shock hazard. Disconnect ALL power sources when installing or servicing this
equipment to prevent electrical shock or equipment damage.
Make all wiring connections in accordance with these instructions and in accordance with pertinent national and local
electrical codes. Use only copper conductors that are suitable for 167 °F (75 °C).
Part Number Audience Purpose
iWorx® SMZ1 Application Guide ,
Document No. 505-048-2 (this doc-
ument)
– Application Engineers
– Wholesalers
– Contractors Provides specific application information about the
BLM series, including sequence of operation and
configuration information.
iWorx® LCI Application Guide ,
Document No. 505-002
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for setting up and using the
iWorx® Local Control Interface.
iWorX BLMC Application Guide ,
Document No. 505-001
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides specific application information about the
BLMC series, including sequence of operation and
configuration information.
iWorX HPM1 Application Guide ,
Document No. 505-004
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides specific application information about the
DXU series, including sequence of operation and
configuration information.
http://www.iWorxWizard.com – Application Engineers
– Wholesalers
– Contractors An on-line configuration and submittal package gen-
erator based on user input. Automatically generates
bill of materials, sequence of operations, flow dia-
grams, wiring diagrams, points and specifications.
Additional
Documentation LonWorks FTT-10A Free Topology Transceiver User’s Guide, published by Echelon Corpora-
tion. It provides specifications and user instructions for the FTT-10A Free Topology Trans-
ceiver.