Taco Marine M20-1013A Скачать руководство пользователя страница 2

Страница: 2 / 4

LOW PROFILE

ADJUSTABLE SEAT SLIDE

M20-1013A

Tech Support: 800.653.8567 | [email protected] | tacomarine.com

@tacomarine

1. Un-package the Seat Slide and place on a

stable surface.

2. Attach the mounting clamp through the

boat seat base using 1/4” countersunk
bolts, washer and nuts.

3. Align Seat Slide so the bottom slots are

aligned with the holes in the bottom of
the seat.

NOTE: Ensure that the Seat Slide
Activation Handle is facing toward the
front of the seat.

4. Attach the Seat Slide to the Seat with 1/4”

bolts and washers, as shown.

NOTE: Tighten these by hand snuggly,
as the next step will require exact
alignment.

INSTALL INSTRUCTIONS

Faces

toward seat

back

Slide

Activation

Handle

Slot aligned

with Seat

Holes

Bolts and

washers

Содержание M20-1013A

Страница 1: ...heck below the surface that you are drilling into for electrical wires tanks hoses or other items that could be damaged by your drill bit or screws WARNING MAINTENANCE The mounting plate and two rails...

Страница 2: ...her and nuts 3 Align Seat Slide so the bottom slots are aligned with the holes in the bottom of the seat NOTE Ensure that the Seat Slide Activation Handle is facing toward the front of the seat 4 Atta...

Страница 3: ...aligned with the holes in the bottom of the seat 7 Attach the Seat Slide to the Seat with 1 4 bolts and washers as shown This is the same process as Step 6 NOTE Tighten these down completely with an A...

Страница 4: ...handle is oriented toward the front of the seat NOTE Mounting Clamp is shown un installed for visual representation of mounting the Seat 10 Mount the 1 4 bolts and washers to the assembly using an All...