Taco Marine GS-400 Pro Series Скачать руководство пользователя страница 8

TACO Marine® | tacomarine.com | [email protected]

8 / Pro SerieS GS-400 / 450 MountS

When fishing with the Grand Slam 400 or 450, easily raise and lower outrigger poles 
by turning the knob on the outboard side of each mount, which will loosen for manual 
adjustment and then tighten to secure the outrigger position. For going under bridges, 
trailering or storage, we recommend lowering the outriggers to ensure they don't get 
damaged. 

How to use

How to clean

Mild dish washing liquid, specialty marine cleaners:  

Sea Safe Boat Wash, Boat Wash Concentrate  

and Super Suds.  

Safe marine lubricants:  

CRC Corrosion Inhibitor, Corrosion Block  

and Get Some Extreme.

Bleach (Clorox, etc.) and mild abrasive cleaners:

Ajax, Comet, Soft Scrub, Rubbing Compounds, etc.

Strong cleaners:

409, Engine Degreasers, etc.

Acids of any type:

Such as Muriatic, naval jelly or aluminum acid.

Always use a mild, non-abrasive soap and fresh water. Thoroughly wash the aluminum 
with a soft towel or sponge to remove dried salt crystals and other contaminants. 
Rinse completely with fresh water.

Safe Cleaners

Harmful Cleaners

Содержание GS-400 Pro Series













Отзывы: