2 / GS-900 ANChOR & STERN LIGhT
Grand Slam 900 mount
• Prepare for installation by ensuring the
mounting surface is clean of any grease
and/or dirt.
• Ensure your hardtop is suitably constructed
to provide a strong mounting surface area
for your anchor and stern light mount. The
GS-900 was designed specifically to prevent
climbing on the boat gunnel to raise and lower
an anchor and stern light.
• If the top is arched, wedge plates can be used
to maintain proper alignment.
KIT CONTENTS
GS-900
Handy Tips
Light assembly
1
1
1
•
SAFETY GLASSES
•
POWER DRILL
•
SCREW GUN
(OPTIONAL)
•
MASKING TAPE
•
1/4" DRILL BIT
•
2-1/2" hOLE SAW
•
ThREE 1/4-20 FLAT, PhILLIPS hEAD SCREWS*
•
ThREE 1/4-20 NYLON LOCKING NUTS
•
MARINE-GRADE SEALANT
•
PENCIL
•
ThREE MARINE-GRADE #18 GUAGE WIRE
(LENGTh BASED ON APPLICATION)
Required
*
*not included
32.75" tube
®
1
Aluminum backing plate
1
Drill template
* Fastener length may be different, depending
on the application. For assistance, please contact
TACO Technical Support on
tacomarine.com
.
