iWorx® TRP Series Sensor
502-019, Effective: October 17, 2011
3
© 2011 Taco Electronic Solutions, Inc.
INSTALLATION INSTRUCTIONS
PRECAUTIONS
General
This symbol is intended to alert the user to the presence of important installation and maintenance (servic-
ing) instructions in the literature accompanying the equipment.
WARNING:
Electrical shock hazard. Disconnect
ALL
power sources when installing or servicing this
equipment to prevent electrical shock or equipment damage.
Make all wiring connections in accordance with these instructions and in accordance with pertinent national and local
electrical codes.
Static Electricity
Static charges produce voltages that can damage the equipment to which this sensor is being connected. Follow these
static electricity precautions when handing this equipment.
• Work in a static free area.
• Touch a known, securely grounded object to discharge any charge you may have accumulated.
• Use a wrist strap when handling printed circuit boards. The strap must be secured to earth ground.
Location
Avoid locations where corrosive fumes, excessive moisture, vibration or explosive vapors are present.
Avoid electrical noise interference. Do not install near large contactors, electrical machinery, or welding equipment.
Mount out of direct sunlight and away from sources of heat and cold other than the space you wish to measure.
BEFORE INSTALLING
About this Document
The instructions in this manual are for the TRP series sensors, which provide temperature-sensing capabilities to an
iWorx® system.
Inspecting the Equipment
Inspect the shipping carton for damage. If damaged, notify the carrier immediately. Inspect the equipment for damage.
Return damaged equipment to the supplier.
What is Not Included with this Equipment
• Job wiring diagrams
• Tools:
– Drill and bits for mounting screws
– Level
– Static protection wrist strap
• Mounting screws
• Accessories
