mn100 Analog Display
8
2.5 Chapter and Page Operation
Instrument information is displayed in a “Chapter and Page” format
using the button to scroll through the Chapters and the and buttons
to move between Pages. The diagram below shows the information
format.
Default Chapter Selection
Setup and Calibration
17
4.1.2 Wind Speed Correction
Note:
Wind Speed reading is factory calibrated to display correctly
and should not be altered unless external factors are thought
to be causing incorrect readings. Correction should only be
carried out if a known correct windspeed is available.
Press and hold the
button for 2 seconds to enter Setup
Press the
button repeatedly to scroll to the “SETUP/WIND”
Chapter
Press the
button to advance to “WIND/+0%” Page
Press the
button to enter Edit Mode
Press the
and
buttons to change the displayed value to the
required percentage.
The bottom digits will indicate the displayed Wind Speed.
Press the
button to exit Edit Mode
Press and hold the
button to exit Setup and return to normal
operation.
Содержание micronet mn100
Страница 1: ...mn100 Analog Display uu040 rev 8 ...
