TACKLIFE TGG02, Руководство пользователя

Страница: 16 / 16

6 SPECIFICATIONS TECHNIQUES
ET DEPANNAGE
14
Problems
Possible causes
Solutions
Burners can ’ t be lit by the
existing ignition system
1/ LPG gas bottle is empty
2/ Faulty regulator
3/ Obstructions in the burners
4/ Obstructions in gas pipe or
hose
1/ Replace with full bottle
2/ Check or replace the
regulator
3/ Clean burners
4/ Clean gas pipe or hose
Burners can ’ t be lit by a match
1/ LPG gas bottle is empty
2/ Faulty regulator
3/ Obstructions in the burners
4/ Obstructions in gas pipe or
hose
1/ Replace with full bottle
2/ Check or replace the
regulator
3/ Clean burners
4/ Clean gas pipe or hose
Weak flame or backfire (Fire
inside the burner - you can hear
a whistling or rusting noise)
1/ LPG gas bottle is too small
2/ Obstructions in the burners
3/ Obstructions in gas pipe or
hose
4/ Windy weather
1/ Use a bigger bottle
2/ Clean burners
3/ Clean gas pipe or hose
4/ Place the plancha in a more
protected place
Control knob is difficult to turn 1/ Windy weather Replace the gas valve
Manufactured BY: SHINERICH INDUSTRIAL LIMITED
8/F, NOBLE CENTER, 1006 FUZHONG 3RD ROAD,
FUTIAN DISTRICT, SHENZHEN, CHINA
Product Name
GAS PLANCHA
M
Product ID Number odel Number
SRGG
1984CU9001 21706
Cat
I
3+(28-30/37)
I
3B/P(30)
I
3B/P(37)
I
3B/P(50)
Country code
BE, CH, CY, CZ, ES,
FR, GB, GR, IE, IT,
LT, LU, LV, PT, SK, SI BG, CY, DK, EE, FI, FR, HR,
HU, IS, IT, LT, LU, MT, NL,
NO, RO, SE, SI, SK, TR PL AT, CH, DE, SK
Gas Type and
Pressure
G30 Butane at
28-30mbar and G31
Propane at 37mbar
G30 Butane and G31
Propane at 30mbar G30 Butane and
G31 Propane at
37mbar G30 Butane and
G31 Propane at
50mbar
Injector Size:
0.79 mm 0.79 mm 0.74 mm 0.66 mm
Total Heat Input
∑Qn= kW (349g/h ）
CAUTION:
USE OUTDOORS ONLY. IF STORED INDOORS, DETACH AND LEAVE CYLINDER OUTDOORS.
READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE.
MINIMUM CLEARANCE FROM SIDE AND BACK OF UNIT TO COMBUSTIBLE CONSTRUCTION: 100CM.
WARNING: ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN AWAY.
MADE IN CHINA
-19
Marking on the injector indicating the injector size. For example, 0.79 means the injector size is 0.79mm.