![background image](http://html1.mh-extra.com/html/tach-it/lb-7/lb-7_user-manual_3150195005.webp)
Operation
Operation
BOTTLE LABELLER
1. Confirm Power Ac100Volt or Ac220Volt..
2. To set label.
3. To adjust Front Silicon Roller with moving
front and back just after Putting your bottle.
※
. Adjusting not to bottle contact dispensing plate with Front Silicon Roller..
4. Adjust bottle position with Guid Bar (12)
5. Confirm label comes out 1~2mm from dispensing Plate and hook Switch
locate on label gap.
6. Power on.
7. Pull wooden grip that mean start.
* Don't pull too excessively.
※
Adjust hook Switch tension properly.
5