EN
Version 2018-09 - Mounting instructions TabLines TWE Tablet wall in solution
5
3.1 Wall recess
Draw the dimensions anywhere on the wall
(lightweight wall). Choose a mounting in portrait or
landscape format, adjusted to the position of the home
button.
Cut out the required area.
Check if the recess is big enough..
Fig. 1: Drawing the dimensions
3. Mounting on hollow walls / lightweight walls
3.3 Position the tablet holder on the brackets or
directly on the wall and secure the case to the
brackets using the supplied M4 screws (see Fig. 3).
Make sure all screws are tight..
Fig. 3: Mounting the tabletholder
3.2 Angles
Depending on the wall, the TabLines TWE can be
mounted with or without the included brackets.
Comply with the mounting depth of the tablet wall
mounting.
Mounting without angles:
If the TabLines TWE is even on the wall, the tablet
holder can be screwed directly onto the wall. It is not
necessary to mount the angles. If the distance is too
large, attach a piece of wood with the appropriate
depth on the rear side before attaching the housing
and screw the housing onto it.
Mounting with angles:
If the cavity is too large, the angles should be used
(see Fig. 2). For example, use wooden pieces to attach
the angles to / in the recess in the wall so that the
tablet holder can be attached to it.
Fig. 2: Screwed angles
