Congratulations on your purchase of a TabletKiosk Sahara Slate PC® i500 Tablet PC. This guide
is aimed at getting you up and running with your new Tablet PC as quickly as possible.
For more information regarding setting up and using your Sahara Slate PC i500, please consult
the digital User’s Guide located on your desktop or visit our website at
www.tabletkiosk.com
.
What’s in the Box
Your Sahara Slate PC should come securely packaged in its shipping container along with the
items listed below. Contact your dealer immediately if you find that anything is missing or
damaged.
Note, however, that contents may be changed without notice.
1.
AC Adapter with Power Cord
2.
Ultrafiber Cleaning Cloth
3.
Neoprene Slip Case
4.
Simple Stand
5.
Windows Getting Started Guide (not included if Linux was pre-installed)
6.
This Quick Start Guide
7.
Standard Lithium-Ion Battery Pack(s)
8.
Stylus Pen (may not be included with capacitive touch only configurations)
Setting Up Your Sahara Slate PC
The following steps will help you power up and get running with your new Sahara Slate PC i500
Tablet PC as quickly and effortlessly as possible. These steps might change slightly over time
with newer revisions of the installed operating system, or when your tablet is purchased from a
systems integrator or solutions provider.
Step 1: Insert the Battery Pack(s)
Turn the tablet over and place it, screen down on a solid, clean, flat surface.
CAUTION:
When turning over the Sahara Slate PC, be careful not to place it on a surface that could scratch
or damage the LCD screen. You can place the included slip case on the surface before carefully setting the
computer down to protect the screen.
Align the battery into the battery compartment and then slide it into the computer until it clicks
securely into place. While it does not matter which battery (one or two) that you install first, if
you are only going to install one battery, it should be installed into battery bay one (
).
Slide the battery-locking tab to the locked ( ) position. Once the locking tab clicks into position,
the battery should be securely seated. Repeat for the second battery if applicable.
Align the battery in the bay and slide it into
place. You will hear a click when the battery is
properly seated.
Slide the locking tab on the battery to the
locked position to keep the battery secured in
the bay.
