1.Water injection of clean-water tank
1.1 Hold down the disassembly button of the clean-water tank and remove the
clean-water tank (as shown in Figure 1).
1.2 Turn the bottom of the clean-water tank upward, open the clean-water tank cover,
and inject clean water. Different water levels can be selected according to the clean
area. If deep cleaning is required, it is recommended to add the specified cleanser in
proportion (as shown in Figure 2).
1.3 Cover the clean-water tank cover and make sure it is in place (as shown in Figure
3).
1.4 Tilt the clean-water tank, firstly put the bottom in place, and then push it inward to
ensure that it is installed in place (as shown in Figure 4).
7
How to Use
Click
1
2
3
4
Note:
·Please do not add non-designated cleanser or disinfectant to avoid corrosion of the
machine.
·Please add special cleanser according to the specified proportion, and do not add too
much.
·Please do not add hot water over 60℃ to avoid deformation of the clean-water tank.
* Tip: Please try to complete a complete charging and discharging process before using
the product to ensure the accuracy of the electric quantity program.