background image

f. 

Internal communication error: Check the internal communication wiring connection 
whether is wrong or missing, then make a restart of the whole system.

g. 

Critical Failure: Both RED and YELLOW LEDs constant lighting.
Solution: Contact the distributor, need a replacement or repairment.

Excluding the four points above, if the faulty is still cannot be located, record the failure 
description and LEDs status, turn off power switch of the battery and contact the distribu-
tor.

6. Emergency Situations

1. 

Leaking Batteries

If the battery pack leaks electrolyte, avoid contact with the leaking liquid or gas. If one is 
exposed to the leaked substance, immediately perform the actions described below.

Inhalation:

 Evacuate the contaminated area, and seek medical attention.

Contact with eyes:

 Rinse eyes with flowing water for 15 minutes, and seek medical at

-

tention.

Contact with skin:

 Wash the affected area thoroughly with soap and water, and seek 

medical attention.

Ingestion:

 Induce vomiting, and seek medical attention.

2. 

Fire

NO WATER! Only dry powder fire or carbon dioxide extinguisher can be used; if possible, 
move the battery pack to a safe area before it catches fire.

3. 

Wet Batteries

If the battery pack is wet or submerged in water, do not let people access it, and then 
contact TAB or an authorized dealer for technical support.

4. 

Damaged Batteries

Damaged batteries are dangerous and must be handled with the utmost care. They are 

not fit for use and may pose a danger to people or property. If the battery pack seems to 

be damaged, pack it in its original container, and then return it to TAB or an authorized 
dealer.

NOTE 

Damaged batteries may leak electrolyte or produce flammable gas.

In case a damaged battery needs recycling, it shall follow the local recycling regulation (ie. 
Regulation (EC) Nº 1013/2006 among European Union) to process, and using the best 

available techniques to achieve a relevant recycling efficiency.

Any further questions, please contact TAB: [email protected]

21

R2428_Operating_Manual_13.05.2021.indd   21

R2428_Operating_Manual_13.05.2021.indd   21

17.5.2021   11:35:50

17.5.2021   11:35:50

Содержание R2428

























Отзывы: