6. Inspection, Cleaning and Maintenance
6.1. General information
Warning!
Never attempt to open or dismantle TAB Li-Ion LiFePO4 battery!
The inside of TAB Li-Ion LiFePO4 battery does not contain serviceable parts.
1. Disconnect TAB Li-Ion LiFePO4 battery from all loads and charging devices before
performing cleaning and maintenance activities (see paragraph 4.8).
2. Place the enclosed protective caps over the terminals before cleaning and
maintenance activities to avoid the risk of contacting the terminals.
6.2. Inspection
1. Inspect for loose and/or damaged wiring and contacts, cracks, deformations,
leakage or damage of any other kind. If damage to TAB Li-Ion battery is found, it must
be replaced by a professional. Do not attempt to charge or use a damaged TAB Li-Ion
battery. Do not touch the liquid from aruptured battery.
2. Regularly check the Ion Power Basic battery’s state of charge. Ion Power Basic
battery will slowly selfdischarge when not in use or whilst in storage
(see paragraph 5.3).
3. Consider replacing the Ion Power Basic battery with a new one if you note either of
the following conditions: The Ion Power Basic battery run time drops below 80% of
the original run time. The Ion Power Basic battery charge time increases significantly.
6.3. Cleaning
If necessary, clean TAB Li-Ion battery with a soft, dry cloth. Never use liquids,
solvents, or abrasives to clean the Ion Power Basic battery.
17