Tab e.module L5.1, Руководство по эксплуатации

Страница: 20 / 26

5.7 Power on
Double check all the power cable and communication cable between batteries and betwe-
en battery and inverter. Switch ON the disconnection device between battery and inverter if
available.
For L5.1:
1.
The one with empty Link A is the Master Battery Module, others are slaves
(1 master battery configure with maximum 31 slave batteries):
2.
Press the black SW button of master battery to power on, all the battery LED light
will be on one by one from the Master battery:
Note:
1.
After the battery module powered on, the soft-start function takes 3sec to active.
After soft-starts battery ready to output high power.
2.
During capacity expansion or replacement, when parallel different SOC/voltage of
module together, it is recommended to maintain the system in idle for ≥15mins or
till the SOC LEDs becomes similar (≤1dot difference) before normal operation.
5.8 Power off
1.
Turn external power source off.
2.
Press black SW switch of master battery. Then all batteries will off.
3.
Switch OFF the disconnection device between battery system and inverter, if avail-
able, disconnect power cables.
20