12
Foil maintenance.
— 07
— a
— 01
— b
— c
— d
Remove the front wing of the fuselage and the mast from the fuselage.
Clean and rinse all the parts of the foil with clean (fresh) water before storing.
Protect the parts by storing them in their TAAROA carrying case or any other suitable protection.
Be sure to keep the foil’s surface clean and smooth. The foil’s functionality depends on a dynamic
balance between each part—the mast and the wings are sensitive to imperfections. If the surface
finish or other parts are damaged, the risk of injury or sudden falls increases.
In the event that the foil’s surface is roughed after a fall or impact, fill it with resin or epoxy putty and
sand until you’re able to find a professional who can repair it. For other advice about repairs, don’t
hesitate to contact our customer service (see Section 10).
①
Mast
②
Fuselage
③
Front wing
④
Rear stabilizer
⑤
Screws
Always rince the foil with fresh water after each use and remember the following:
①
②
③
④
⑤
EN
