9
Electric back
Electrical functions
Pressing the "Mode" button to get into the menu from which electrical
functions can be operated with a joystick. You select function by flipping the
pages with the joystick, and activate the feature by taking the control stick
forward or backward.
Joystick activated
If you activate the joystick before or just when you turn on, the symbol will
blink.
Release and center the joystick to use the chair.
If the joystick is not released and centered within 5 seconds, the chair will not
run, even though the joystick is released. Turn on and off the chair again to
make it run.
Driving Profile
The chair can be programmed for different driving profiles. Contact TA
Service A/S for further instruction and programming
WARNING!
The chair is EMC tested. However, it is possible that the wheelchair can be affected by
electromagnetic fields from mobile phones for example. Similarly, it cannot be excluded that the chair
can emit electromagnetic fields that can affect the surroundings, such as alarm systems in stores.
Locking Joystick
The system can be locked using the joystick, so the chair cannot drive and the system cannot be
activated.
Locking the system:
When the chair is on, press and hold the "Power" button.
1. After 1 second the chair beeps, release "On-Off"
2. Press the joystick forward until a beep appears
3. Press the joystick back until a beep appears
4. Release the joystick, there is now a long beep
5. The chair is now locked. - Symbol is shown
in display
Locking up the system:
1. If the chair is off, turn on the chair
2. Press the joystick forward until a beep appears
3. Press the joystick back until a beep appears
4. Release the joystick, there is now a long beep
5. The chair is now locked up - the symbol disappears.
In case of lock this symbol appears in
display
