4
2
3
1
26
Adjusting the footplate height
When adjusting the height of the foot-
plate(s), never touch or handle the adjust-
ment mechanism or the underside of the
footplate(s). – Risk of a crushing injury!
Make sure that the leg support and the
footplate(s) have adequate ground clear-
ance!
☞
Floor coverings or other surfaces can
be damaged when the leg support or
footplate(s) are folded down!
Use the control module to raise/lower the
leg support to a suitable height [1].
☞
See the ‘
Control module
’ chapter in the
Operating manual.
Dual leg support
The angle of the divided leg supports [2]
can be adjusted electronically. They can
also be swung to the side or completely
removed.
Footplates
To make it easier to transfer to and from the
wheelchair, the footplates (4) can be fold-
ed up [3] and/or the leg supports can be
swung out to the sides.
☞
Make sure you don’t pinch your fin-
gers!
–
Remove both feet from the footplates.
☞
Before driving, the footplates should be
folded down again [2].
Folding up the footplates
Always remove your feet before folding up
the footplates [3].
MDR,
not
final
version
