The Build
Please Note: Few pictures shown below are of different plane and for reference purpose only.
91. Please refer to the (Page 4) of exploded view and above image for
the truss length references.
92. Please refer to the (Page 4) of exploded view and above image for
the truss length references.
93. Locate the above 3 pcs servo arm extenders.
94. Install the extenders over the stock plastic servo arms using the
small screw. Wrap with thread for more strength if desired
95. Here are all servo arm extenders are installed over the stock servo
arms.
96. Locate the control horns, for elevator control horn you will notice a
small square shaped cutout on the underside. This is meant to be
placed around the spar of the elevator that was installed earlier.
Aileron
control horns are also little bigger in height than the rudder horn.
91
93
92
94
95
96
135mm
135mm
145mm
150mm
145mm
100mm
145mm
80mm
For Ailerons
For Elevator
For Rudder
Page 21
