T4W PIK GUN BLACK, Инструкция по эксплуатации/Перечень запасных частей

Страница: 9 / 18

Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu
9
PIK
q
GUN SUPER BLACK
You must observe the following points in the interest of your own safety!!!
Safety instructions:
• The Super Black Booster creates considerable noise pressure. Please wear hearing
protection in order to avoid noise which can be damaging to your health.
• When working with the cleaning gun, small parts may be whirled into
the air: Wear protective goggles to prevent eye injuries.
• The cleaning gun nebulises the cleaning liquid very finely. To prevent health
hazards from inhalation, wear appropriate respiratory protection.
• Ensure all others in the area are wearing impact-resistant eye goggles and face masks.
• Only use this device in ventilated spaces.
• Never operate the Super Black Booster with more than 8.0 bar.
• The recommend working pressure of this device is 6.2 bar.
• Do not use cleaning agents which are acidic, alkali and/or inflammable. We recommend
using neutral cleaning agents. When using cleaning fluids which need to be diluted, always
strictly observe the manufacturer’s instructions to mąkę sure the mixture is correct.
• Never point the cleaning gun towards the face or body of you or anyone else.
• Keep the cleaning guń out of the reach of children.
• To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions before performing any such task.
• This tool and its accessories must not be modified in any way.
• Air pressure below the recommended minimum will not work.
• Always shut off the air hose, the toll from the air, when not in use,
before changing accessories or when making repairs.
• Never direct compressed air at yourself or anyone else.
• Hoses can whiplash and cause serious injury. Always check
for damaged or loose hoses and fittings.
• Do not exceed maximum air pressure of 8.0 bar or as stated on the name plate.
• Slipping, tripping and falling are the main causes of serious injury or death. Good
light and clear work surfaces are essential; e.g. Do not leave hoses lying around.
• Operators and maintenance personnel must be physically able to handle the bulk, weight and
power of this tool. In addition, make sure you are well balanced and have secure footing.
• This tool is not intended for use in explosive atmospheres and is
not insulated for contact with electric power sources.
• Be aware that prolonged use may cause metal fatigue.
• We recommend you never clean any safety-related components, e.g. safety
belts, electrical or electronic modules, with this cleaning gun.