7
• When finished, turn the air valve off and remove
the puller from the body panel.
• Disconnect from the air supply, remove the suction cup from
the puller and refit the protective cover. Place all parts back
in the case and store it in a safe, dry, childproof location.
• Alternatively, weld a wavy wire strip to the panel, then use the
hook in conjunction with the sliding hammer to pull out a dent.
Maintenance
Check condition of the suction cups regularly, if damaged, replace them using
genuine parts only.
Always keep the suction cups clean and free of oil and grease. Clean them
regularly with a non-aggressive cleaner.
In order to preserve elasticity, do not expose suction cups to sunlight over an
extended period of time.
Keep the tool in a clean, serviceable condition, using a slightly dampened cloth
to clean it.
