background image

 
Date: 18.12.15 

Manual to personal carriage decoder 

WD-PW115, WD-PW 170, WD-PW-230, WD-

PW260, WD-PW290 

 

 
 

Document: SW 3.0 / 01www.tec4trains.deSeite   

 3 from 42 

Revolutionen im kleinen Maßstab

Introduction 

With the wagon decoder WD-PWxxx you have chosen a product from the TCCS (Train Coupling & 
Communication System) range which adds functions which considerably enhance the reliability and 
fun of operating a digitally controlled model train. 
In order for you to utilize and operate this high quality product as intended, please read this manual 
thoroughly and keep it even after the installation. 
Please note that this decoder can be updated so that its functionality depends on the implemented 
software version. New software versions can be downloaded from our website and then installed via 
the decoder manager. Our manuals are available as PDF-files. In order to find the applicable soft-
ware version, please check the footer of the manual (on the left hand side – here:SW 2.5). The revi-
sion status can be found after the "/" (here: 01). 
Most background information cannot be delivered in this manual. For further details, please use the 
links on our website. However, T4T is not liable for the content of 3rd party web pages! 
 

 
Copyright by T4T, technoloy for trains, Swistec GmbH. 
Rights reserved for errors, technical changes and all other rights. 
 

 
Abbreviations used in this manual: 
 
Abbreviation: 

 

CV 

Configuration Variable

 

DCC 

Digital Command Control;

 

LD-1x 

locomotive-decoder-1; x represents the various decoder types

 

POM 

Program on main

 

SW 

Software

 

TC-H0 

TrainConnection H0

 

TCCS 

TrainCoupling&CommunicationSystem

 

TRAM 

Train Manager

 

WD-GWx 

car-decoder for freight car (German: GüterWagon); x represents the number of 
function outputs

 

WD-PWxxx 

Wagon Decoder for Passanger Wagons; xxx indicates the length of the lighting 
strip (in mm)

 

Important Notice: 

The decoder is suitable for users 14 years and older. 

It may only be installed by an experienced user. 

The decoder may be destroyed by incorrect installation. 

Keep away from children under 14 years! 

All trade names, company names and product names are trademarks or registered trademarks of 

their respective owners. 

Содержание WD-PW Series











































Отзывы: