www.t4control.com
T4Control
T4Control 2014 – All rights reserved
2
2
Features
The driver provides remote control of the WD TV using applications from Control4 as MyHomePC,
MyHome for iOS and Android.
Recommendations
A list of short recommendations to make it a better experience of using this driver.
1)
Use Ethernet cable for connection. Wi-‐fi can create problems of communication between
Control4 and WD (set static IP always);
2)
Assign shortcuts to the numbers of remote control (check following topics in this manual)
3)
Do not power off the WD to control ON/OFF using a relay for instance. When WD starts from
cold boot, it takes longer to start up. Tell the user to use the default red button to start it up
(you can change it if you want).
Limitations
This driver has the following limitations:
1.
No power discrete codes. WD TV Live don’t have discrete ON and OFF codes. This issue makes
difficult for Control4 to understand when the device is ON or OFF. To power on or power off the
device this driver is configured to use the RED BUTTON. The user must turn on/off manually. You
can change to another button by changing the properties of the driver.
2.
Mute toggle cannot be identified by Control4 as WD TV do not have discrete codes for that. But
the mute button will work property.
3.
Models supported: WD TV Live and WD TV Play.
Test before install
You should test this driver on your shop before install on customer’s site. The installation is
straightforward. In case of need for support, please contact us on your helpdesk.
