Installation Guidelines::
DC Block::
A DC block has been included with your MS-34. The DC
block should be used when your system is utilizing a cable
TV feed or non-powered antenna. It should be installed
between the antenna and the antenna/CATV port
on the MS-34.
See fig. 5.
5
Connecting and Using::
Hooking up your MS-34 is easy. There are two levels of
F-connectors. The three connectors on the upper level are
the inputs, and the four connectors on the lower level are
the outputs.
See fig. 6.
The inputs are clearly labeled on the top level, and
indicate which connectors should be used for satellite
feeds (13V and 18V) and which should be used for the
antenna/CATV feed.
See fig. 6a.
The outputs are clearly marked “receiver 1” through
“receiver 4,” with each output transmitting exactly the
same signal.
See fig. 6b.
6
receiver 1
receiver 2
sat. 13V
antenna/CATV
sat. 18V
receiver 3
receiver 4
Fig. 6
a
b
MS-34
ANTENNA/
CATV
SATELLITE
DC BLOCK
OUT TO RECEIVERS
Fig. 5
T0213-MS-34OM.qxp 9/16/03 09:59 AM Page 6
