T Scale RWP, Техническое руководство

Страница: 23 / 30

RWP Weighing Indicator Technical Manual(v1.16)
- 23 -
 Load the first calibration mass weight on the platform (mass weight should
be1/3 of the max capacity) and wait few seconds for display stability.
 Then press key , display will be shown
 Load the second calibration mass weight on the platform (mass weight
should be2/3 of the max capacity) and wait few seconds for display
stability.
 Then press key ,display will be shown
 Load the third calibration mass weight on the platform (mass weight should
be3/3 of the max capacity) and wait few seconds for display stability.
 Then press key ,display will be shown
After the calibration the display will start a self test. Remove the load from
platform during the test. Display will come to weighing mode automatically.
Creep Calibration
 Enter the function by pressing , display will be shown
 Make sure there are no loads on the platform and wait few seconds for
stable indicator on.
 Enter the function by pressing , display will be shown
 Load the calibration mass weight on the platform (mass weight should be
the max capacity) and wait few seconds for display stability.
 Then press ,display will be shown
 Remove the weight ,display will be shown
After the calibration the display will start a self test. And come to weighing mode
automatically
If display will be shown any error or incorrect value, repeat the procedure again.
Load 2
Load 3
pass
unLoad
Load F
Creep xx
Creep OK