MIDI Timing clock:
This is the third option to control the speed for the Replica. This way, a
Master clock can be received so that the Replica always is in sync with
keyboards, drum machines, etc.
Turn OFF MIDI clock:
In some rare cases, a MIDI conflict in your system can occur. Therefore,
turning off the MIDI clock is possible as a quick fix.
Push down the TAP TEMPO bottom at power-up. The MIDI clock will
be disabled. It will automatically be turned ON again after being
turned OFF and powered up again.
Please note!
Your Replica can be used in an effect loop but note that input signals
above 2 dB can cause distortion!
MIDI
The MIDI jack (input only) lets you control three MIDI functions, which
can be externally controlled from a MIDI device sending MIDI CC’s or
MIDI Clock.
Control Change:
Replica can be controlled by MIDI control changes. It can be turned
ON and OFF with MIDI Control change 21. If the value is 0 in the
control change, it will turn the pedal OFF. If the value is 127, then the
pedal will be turned ON.
It is also possible to tap in a delay by using control change number 20.
The value is not used. The Replica measures the time between each
control change no matter what the value is.
Send MIDI CTL no. 20 to control Tap Tempo,
Value 0 = OFF, Value 127 = ON
Send MIDI CTL no. 21 to control Delay ON/OFF
Value = Not used
