Try experimenting with the eq knobs for different sounds.
Dialing in a scooped metal distortion can be done by cutting
the mids and/or boosting the bass and treble. Conversely, to
obtain a more classic rock distortion, boost the mids a little
bit and fine tune by cutting the bass and treble frequencies
to taste.
Active eq is a very responsive and powerful tone-shaping
tool, so be sure to experiment with these controls at differ-
ent gain levels. The Nitros excels at a modern and aggressive
distortion sound but careful tweaking of the eq knobs will
tell you that “hypergain” is just one of its many faces!
Gain:
Adjusts the amount of distortion in the effect.
Level:
Adjusts the overall output level of the effect.
Bass, Mid, Treble:
Active cut/boost of the low, middle and
high frequencies, respectively.
The three equalizer knobs have no effect on the sound when
set to 12 o´clock i.e. no boost or cut will be applied to the
signal.
To boost the lows, mids or highs, turn the associated knob
clockwise from the 12 o´clock position.
To cut those same frequencies, turn the knob anticlockwise
from the 12 o´clock position.
NITROS controls
Hint
