BACK PANEL FEATURES
MAINS INPUT:
The BIGTONE T25 is capable of operating at line voltages of 115 or 230 V AC,
50-60Hz.
VOLTAGE SWITCH:
Use this switch to change one of two voltages, 115 or 230 V AC
MAINS FUSE:
If the fuse should fail, it must be replaced with the same type and value in
order to avoid damage to the amp.
HT FUSE:
This fuse protects the power supply in case of tube failure. If it blows,
check for a bad power tube. If tube-failure is not the cause, the BIGTONE T25
should be brought to a qualified service center for repair. If the fuse should fail, it
must be replaced with the same type and value to avoid damage to the amp.
SPEAKERS:
The BIGTONE T25 provides a 16 ohm and a 8 ohm speaker output. The
internal speakers use the 16 ohm speaker output. The 8 ohm output is
for connection of speaker(s) or speaker cabinet(s) with a minimum total
impedance of 8 ohms.
WARNING: Never play the BIGTONE T25 without a speaker connected.
This may cause serious damage to either the power tubes and/or the
output transformer. Always use speaker cable for extension speaker(s) or
speaker cabinet(s).
REVERB IN/OUT:
Sockets for connecting the the built-in Reverb tank
REVERB REMOTE
SWITCH:
Socket for the connection of a REVERB switch for switching the signal
from the built-in Reverb tank ON or OFF.
Issued in Vejle September 14th 2003
Lars Dahl-Jørgensen
Managing Director
® T-Rex Engineering Aps · Ibaek Strandvej 3A · DK-7100 Vejle · Tel. +45 75 72 71 81 · www.t-rex-eng.com
Sebastian Jensen
Managing Director
Содержание BigTone T25 Combo
Страница 1: ...B I G T O N E T 2 5 COMBO USER S MANUAL...
