ALBERTA
Alberta is a distortion pedal that delivers a creamy, yet crunchy sound with a smooth mid-range boost.
The GAIN knob controls the distortion amount.
The LEVEL knob sets the overall volume.
The TONE knob affects the top end (edge) of your signal without compromising sonic quality, allowing you
to dial in the perfect tonal flavour for you taste.
Controls:
GAIN, LEVEL and TONE
Connections:
INPUT-Jack 6,3 mm. OUTPUT-Jack 6,3 mm.
DC-Jack 2 mm. pin.
Power supply:
9-12 Volt DC or battery 9 Volt Alkaline. When using a Power Supply, you don’t
have to put in a battery.
Effect usage:
20 mA
Weight:
500 gram packed in box
Open the battery-cover on the back using a flat-tipped screwdriver in the slot. Remember to position the
battery correctly.
USER’S MANUAL
ALBERTA
Congratulations on the purchase of your new T-Rex pedal
T-Rex grants a 2-year warranty against defective parts or workmanship.
In the event of a defect, please contact the nearest T-Rex dealer.
T-Rex Engineering ApS, Tel.: +45 75 72 71 81, Fax: +45 75 72 71 98
www.t-rex-engineering.com, mail: [email protected]
