background image

Step by Step

Enhanced phone functions

58

Assigning a station number

If this function has been configured (contact your service personnel), 

you can selectively assign a specific number (DID number) to your 

telephone before making an external call. The assigned number then 

appears on the called party’s display.

N

Open the Program/Service menu 

Æ

Page 29.

Select and confirm the option shown.

j

Enter the DID number you wish to use.

j

Dial the external number.

Associated dialing/dialing aid

If this function has been configured (contact your service personnel), 

you can use a dialing aid to dial numbers and set up calls for your 

telephone.

The operating procedure depends on whether the dialing aid is con-

nected to the S

0

 bus or the a/b (T/R) port.

You can also use your system telephone as a dialing aid for other tele-

phones.

Dialing aid on the S

0

 bus:

On the PC, select a destination and start dialing.

^

The speaker on your telephone is switched on. Lift the handset when 

the other party answers.

Dialing aid at the a/b (T/R) port:

On the PC, select a destination and start dialing.
"Lift the handset" appears on the PC screen.

^

Lift the handset.

Dialing aid from your telephone for another telephone:

N

Open the Program/Service menu 

Æ

Page 29.

Select and confirm the option shown.

j

Enter the internal station number ("Dial for:").

j

Enter the number you wish to dial.

Temporary MSN

Associated dial

Содержание Octopus F270 IT


















































































































































Отзывы: