T-Comfort Comfort Pro S, Руководство пользователя

Страница: 40 / 48

38
Systematic Telephony Remote-Controlled Functions
Remote-Programmable Call Forwarding
Configuring the function
Z
(reserved tel. no.)
Wait until the connection to the
communications system has been
established. You hear a positve
acknowledgement tone.
Z
(system PIN)
*
Z
(your internal tel. no.)
*
(external access code, e.g.
0
)
Z
(destination no.)
#
Deleting the function
Z
(reserved tel. no.)
Wait until the connection to the
communications system has been
established. You hear a positve
acknowledgement tone.
Z
(system PIN)
*
Z
(your internal tel. no.)
#
Using the telephone number reserved in the Comfort Pro S/
T-Comfort 930 DSL for remote control, you can configure or delete
immediate call forwarding for your own telephone number from a
remote location. This remotely-programmed forwarding overwrites
any other internally active forwarding. Forwarding “On Busy“ and
“After Delay“ are not affected. Incorrect or non-existent telephone
numbers are rejected. Your authorisation is checked in the same
way as for forwarding within the Comfort Pro S/T-Comfort 930 DSL.
A correct entry is confirmed with a positive acknowledgement
signal, and the external call subsequently ended.
N
Note: The procedure will be aborted if there is a pause of longer than 60 seconds be-
tween the entry of two digits. Thanks to this time span, it is also possible to implement
remote-controlled functions from GSM cellphones.