T+A TCI W 2, Руководство пользователя

Страница: 20 / 36

20
Wiring variants
Connecting the sub-woofer to a power amplifier
Serien Nr Serial no Nr de Serie - . / . / . :

Keine Ga rantie
Ohne original Ser Nr . .
Leistungsaufnahme Standby:
Power consumption standby:
Puissance d’ entrée:
1 VA
LEFT
SPEAKER
RIGHT
SPEAKER
POWER AMPLIFIER
Wiring diagram 1
Switch / adjustor settings
No. Purpose
No control
voltage
   
Automatic power-on
AUTO
   
Control signal
   

 

Filter ON / CTRL
The settings of the switches / adjustors     ,     ,     and
    can be changed as required.
The output signals from the power amplifier are
connected to the sub-woofer’s terminals
HI LEVEL IN

 

.
The speaker’s internal crossover passes only the low-
frequency part of the signal to the sub-woofer.
The remainder of the signal is passed to the satellite
loudspeakers via the sub-woofer’s speaker output
terminals (
HI LEVEL OUT ).
The automatic power-on circuit is triggered by the
loudspeaker signal.
Note:
If you are using banana plugs, the loudspeaker terminals
must be tightened!
Connecting the sub-woofer to a pre-amplifier
OUT
CTRL
PRE
OUT
L
R
Serien Nr Serial no Nr de Serie - . / . / . :

Keine Garantie
Ohne original Ser Nr . .
Leistungsaufnahme Standby:
Power consumption standby:
Puissance d’ entrée:
1 VA
PRE-AMPLIFIER
TO POWER AMPLIFIER INPUT
CINCH
Y-ADAPTOR
CINCH-
LEAD CINCH-
LEAD
CINCH
Y-ADAPTOR
CONTROL
VOLTAGE
ADAPTOR
LEAD
L R
Wiring diagram 2
Switch / adjustor settings
No. Purpose
No
control
voltage
Control
voltage
present
   
Automatic power-on
AUTO
AUTO
   
Control signal
    CTRL

 

Filter ON / CTRL
ON / CTRL
The settings of the switches / adjustors     ,     ,     and

 
 can be changed as required.
The CINCH IN sockets     on the sub-woofer are
connected to the output sockets of the pre-amplifier
using Cinch leads.
The speaker’s internal crossover passes the low-
frequency part of the signal to the sub-woofer.
Use without control voltage:
The automatic power-on circuit is triggered by the pre-
amplifier signal.
Use with control voltage (optional):
If the pre-amplifier features a control voltage output, this
control voltage is passed to the
DIN IN socket     via an
adaptor lead. This triggers the automatic power-on
circuit.
The

P 1220 R pre-amplifier supplies a control
voltage at the CRTL OUT socket.