T+A DD 1535 R Скачать руководство пользователя

Страница: 7 / 64





(Amplifier Menu)

•

Opening the '

Main Menu

Pressing

this button

briefly

opens the

Main Menu

This  is  where  you  can  change  the  surround  receiver
settings  which  are  only  occasionally  required  in
normal daily listening: perhaps to allow for temporary
changes  in  the  listening  room,  or  to  compensate  for
unusual  characteristics  of  a  special  listening  source
(see

Main Menu

•

Opening the 'Configuration Menu'.
Holding

the



- button

pressed in

for about

one second opens the

Configuration Menu

. This

menu  contains  the  settings  and  decoder  functions
which  are  rarely  needed,  such  as  level  and  tone
adjustments.  Dedicated  buttons  for  functions  of  this
sort  are  not  present,  as  it  is  important  that  the  front
panel  should  be  uncluttered.  (see

Configuration



PHONES

(headphone volume control)

In normal use the headphone volume knob is recessed
into the front panel. If you press the knob once, it extends
from the front panel and can then easily be rotated.

You can now adjust the volume of the headphones
independently of the loudspeaker output stages.

When you are satisfied with the level, push the knob
back into the front panel under light pressure. It will
automatically engage in the recessed position.



PHONES

(headphone socket)

Socket for stereo headphones with a 3.5 mm Ø barrel
plug and an impedance of at least 50

Ω

. The

DD 1535 R

features a separate high-quality headphone amplifier,
independent of the loudspeaker output stages.

Note:

If  the  loudspeakers  are  switched  on,  the  headphones
always  supply  a  STEREO  signal,  regardless  of  the
selected mode of operation.
If  the  loudspeakers  are  switched  off,  a  simulated
surround  signal  (DOLBY  Headphone)  is  available  at  the
headphone output if a surround mode is selected.

VCR recordings with the DD 1535 R

The overall design of the

SR 1535 R

enables you to

select an recording source regardless of the viewing /
listening source currently selected.

This  facility  make  it  possible  to  record  one  AV  source
device  (e. g.  SAT  receiver),  while  you  simultaneously
view  and  listen  to  another  AV  source  device  (e. g.  DVD
player).

If you wish to make a timer-controlled VCR recording,
you must first select the appropriate recording source
(e. g. SAT receiver).

At the time the recording is to take place, the decoder
must not be completely switched off (i. e. it must be
switched on or in stand-by mode).

In stand-by mode the decoder confirms its actions by
displaying the selected recording source on its screen in
dimmed form:

'REC'

and source name.

Automatic power-off:

Normally the decoder switches itself off in parallel with
the master device. If the system is switched to stereo
mode, the screen shows:

PREAMP

After two minutes in stereo mode the decoder
automatically switches to stand-by mode, as it is
redundant in stereo mode.

You can switch on the decoder again at any time by
pressing the



button briefly; it then reverts to